ARP Head Stud Kit - Honda Integra DC5/Civic EP3/Accord CL (K20/K24)

ARP SKU: 208-4701
ARP Head Stud Kit - Honda Integra DC5/Civic EP3/Accord CL (K20/K24) - Sydney Performance Parts & Tyres - Prestons Sydney Australia

ARP Head Stud Kit - Honda Integra DC5/Civic EP3/Accord CL (K20/K24)

ARP SKU: 208-4701
Regular price $299.95
/

It is for good reason that virtually every top professional engine builder relies on ARP Pro Series head studs for their all-out competition powerplants. Simply stated, there’s not a better stud setup on the market today.

For openers, ARP uses a premium grade 8740 alloy that is rated far superior to “aircraft” quality. Each stud is placed vertically in special racks and precisely heat-treated to 200,000 psi. This procedure ensures complete heat penetration and the results are far superior to those lesser quality studs from other manufacturers who just dump pieces in a basket and hope for the best.

Following heat-treat, each stud is centerless ground to make it as close to perfectly concentric as possible. This procedure involves about ten very slight cuts and results in an exceptionally straight part. It’s important to note that lesser quality studs are not even centerless ground – the material is thread rolled in bar stock form (mostly before heat-treat, when the material is easier to machine). Because ARP studs are manufactured to such exacting tolerances, you will note that gaskets and cylinder heads literally glide into position and are perfectly aligned – something that won’t happen with inferior quality head studs.

ARP studs are thread rolled after heat-treat, which gives them about 1000% (that’s ten times) better fatigue strength than those studs that are threaded prior to heat-treat (a very common industry practice). It costs a lot more to do it this way, because it’s tough on tooling, but the results are well worth the extra effort.

You will also note that ARP offers specially undercut studs for several engines. This procedure (done only to the shorter studs) more equalizes the “stretch” of both studs, which makes for a more consistent clamping force – and one that compensates for head gasket compression when the cylinder heads are installed. This helps prevent blown head gaskets, and assures optimum engine sealing!

Premium quality heat-treated 8740 chrome moly steel head stud kits are available for most every domestic and import applications. You won’t find a better quality stud on the market from any other source. Look for ARP stamped on each stud as your assurance of quality. Clearly, ARP Head Stud/Bolt Kits are the best on the market today, and the favorite of leading professional engine builders in all forms of racing.

 

Specifications
Socket Size(s) 1/2 12pt, 3/16 Allen
Vehicle Fitment is provided as a guide only to narrow down results. Please check listing for any additional information (measurements, specifications, additional notes) which may affect compatibility or ask for assistance.
  • 2001 Honda Civic EP3 Type-R
  • 2001 Honda Integra DC5
  • 2002 Honda Accord CL Euro
  • 2002 Honda Civic EP3 Type-R
  • 2002 Honda Integra DC5
  • 2003 Honda Accord CL Euro
  • 2003 Honda Civic EP3 Type-R
  • 2003 Honda Integra DC5
  • 2004 Honda Accord CL Euro
  • 2004 Honda Civic EP3 Type-R
  • 2004 Honda Integra DC5
  • 2005 Honda Accord CL Euro
  • 2005 Honda Civic EP3 Type-R
  • 2005 Honda Integra DC5
  • 2006 Honda Accord CL Euro
  • 2006 Honda Integra DC5
  • 2007 Honda Accord CL Euro
  • 2007 Honda Integra DC5
  • 2008 Honda Accord CL Euro

 

  • We offer Local Delivery and Pickup
  • Secure payments
  • In stock, ready to ship
  • Inventory on the way
Tax included. Shipping calculated at checkout.

It is for good reason that virtually every top professional engine builder relies on ARP Pro Series head studs for their all-out competition powerplants. Simply stated, there’s not a better stud setup on the market today.

For openers, ARP uses a premium grade 8740 alloy that is rated far superior to “aircraft” quality. Each stud is placed vertically in special racks and precisely heat-treated to 200,000 psi. This procedure ensures complete heat penetration and the results are far superior to those lesser quality studs from other manufacturers who just dump pieces in a basket and hope for the best.

Following heat-treat, each stud is centerless ground to make it as close to perfectly concentric as possible. This procedure involves about ten very slight cuts and results in an exceptionally straight part. It’s important to note that lesser quality studs are not even centerless ground – the material is thread rolled in bar stock form (mostly before heat-treat, when the material is easier to machine). Because ARP studs are manufactured to such exacting tolerances, you will note that gaskets and cylinder heads literally glide into position and are perfectly aligned – something that won’t happen with inferior quality head studs.

ARP studs are thread rolled after heat-treat, which gives them about 1000% (that’s ten times) better fatigue strength than those studs that are threaded prior to heat-treat (a very common industry practice). It costs a lot more to do it this way, because it’s tough on tooling, but the results are well worth the extra effort.

You will also note that ARP offers specially undercut studs for several engines. This procedure (done only to the shorter studs) more equalizes the “stretch” of both studs, which makes for a more consistent clamping force – and one that compensates for head gasket compression when the cylinder heads are installed. This helps prevent blown head gaskets, and assures optimum engine sealing!

Premium quality heat-treated 8740 chrome moly steel head stud kits are available for most every domestic and import applications. You won’t find a better quality stud on the market from any other source. Look for ARP stamped on each stud as your assurance of quality. Clearly, ARP Head Stud/Bolt Kits are the best on the market today, and the favorite of leading professional engine builders in all forms of racing.

 

Specifications
Socket Size(s) 1/2 12pt, 3/16 Allen
Vehicle Fitment is provided as a guide only to narrow down results. Please check listing for any additional information (measurements, specifications, additional notes) which may affect compatibility or ask for assistance.
  • 2001 Honda Civic EP3 Type-R
  • 2001 Honda Integra DC5
  • 2002 Honda Accord CL Euro
  • 2002 Honda Civic EP3 Type-R
  • 2002 Honda Integra DC5
  • 2003 Honda Accord CL Euro
  • 2003 Honda Civic EP3 Type-R
  • 2003 Honda Integra DC5
  • 2004 Honda Accord CL Euro
  • 2004 Honda Civic EP3 Type-R
  • 2004 Honda Integra DC5
  • 2005 Honda Accord CL Euro
  • 2005 Honda Civic EP3 Type-R
  • 2005 Honda Integra DC5
  • 2006 Honda Accord CL Euro
  • 2006 Honda Integra DC5
  • 2007 Honda Accord CL Euro
  • 2007 Honda Integra DC5
  • 2008 Honda Accord CL Euro

 

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Sold Out
Kelford Performance Camshafts - Toyota Yaris GR XPA16R - Sydney Performance Parts & Tyres - Prestons Sydney Australia
Kelford Performance Camshafts - Toyota Yaris GR XPA16R
Kelford Cams
$1,425.00
Sold Out
Kelford Performance Camshafts - Toyota Supra JZA80 (2JZ Non-VVTi) - Sydney Performance Parts & Tyres - Prestons Sydney Australia
Kelford Performance Camshafts - Toyota Supra JZA80 (2JZ Non-VVTi)
Kelford Cams
$1,150.00
Sold Out
Kelford Beehive Valve Springs & Retainers Kit - Toyota Yaris GR XPA16R - Sydney Performance Parts & Tyres - Prestons Sydney Australia
Kelford Beehive Valve Springs & Retainers Kit - Toyota Yaris GR XPA16R
Kelford Cams
$703.34
Sold Out
Integrated Engineering Spec Mahle Forged Pistons - Audi/VW (2.0 TSI/TFSI) - Sydney Performance Parts & Tyres - Australia 02 9825 8140
Integrated Engineering Spec Mahle Forged Pistons - Audi/VW (2.0 TSI/TFSI) - Sydney Performance Parts & Tyres - Australia 02 9825 8140
IE Spec Mahle Forged Pistons - Audi/VW (2.0 TSI/TFSI)
Integrated Engineering
$1,754.00
Recently viewed