ARP Head Stud Kit - Nissan Skyline R32/R33/R34 (RB20/RB25)

ARP SKU: 202-4301
ARP Head Stud Kit - Nissan Skyline R32/R33/R34 (RB20/RB25) - Sydney Performance Parts & Tyres - Prestons Sydney Australia

ARP Head Stud Kit - Nissan Skyline R32/R33/R34 (RB20/RB25)

ARP SKU: 202-4301
Regular price $319.95
/

It is for good reason that virtually every top professional engine builder relies on ARP Pro Series head studs for their all-out competition powerplants. Simply stated, there’s not a better stud setup on the market today.

For openers, ARP uses a premium grade 8740 alloy that is rated far superior to “aircraft” quality. Each stud is placed vertically in special racks and precisely heat-treated to 200,000 psi. This procedure ensures complete heat penetration and the results are far superior to those lesser quality studs from other manufacturers who just dump pieces in a basket and hope for the best.

Following heat-treat, each stud is centerless ground to make it as close to perfectly concentric as possible. This procedure involves about ten very slight cuts and results in an exceptionally straight part. It’s important to note that lesser quality studs are not even centerless ground – the material is thread rolled in bar stock form (mostly before heat-treat, when the material is easier to machine). Because ARP studs are manufactured to such exacting tolerances, you will note that gaskets and cylinder heads literally glide into position and are perfectly aligned – something that won’t happen with inferior quality head studs.

ARP studs are thread rolled after heat-treat, which gives them about 1000% (that’s ten times) better fatigue strength than those studs that are threaded prior to heat-treat (a very common industry practice). It costs a lot more to do it this way, because it’s tough on tooling, but the results are well worth the extra effort.

You will also note that ARP offers specially undercut studs for several engines. This procedure (done only to the shorter studs) more equalizes the “stretch” of both studs, which makes for a more consistent clamping force – and one that compensates for head gasket compression when the cylinder heads are installed. This helps prevent blown head gaskets, and assures optimum engine sealing!

Premium quality heat-treated 8740 chrome moly steel head stud kits are available for most every domestic and import applications.

You won’t find a better quality stud on the market from any other source. Look for ARP stamped on each stud as your assurance of quality.

Clearly, ARP Head Stud/Bolt Kits are the best on the market today, and the favorite of leading professional engine builders in all forms of racing.

 

Vehicle Fitment:

  • Nissan Skyline R32 GTS, GTS-T (RB20DE/RB20DET)
  • Nissan Skyline R33 GTS, GTS-T (RB25DE/RB25DET)
  • Nissan Skyline R34 GT, GT-T (RB25DE/RB25DET)
Specifications
Socket Size(s) 1/2 12pt, 3/16 Allen
Vehicle Fitment is provided as a guide only to narrow down results. Please check listing for any additional information (measurements, specifications, additional notes) which may affect compatibility or ask for assistance.
  • 1989 Nissan Skyline R32 GTS
  • 1989 Nissan Skyline R32 GTS-4
  • 1989 Nissan Skyline R32 GTS-T
  • 1990 Nissan Skyline R32 GTS
  • 1990 Nissan Skyline R32 GTS-4
  • 1990 Nissan Skyline R32 GTS-T
  • 1991 Nissan Skyline R32 GTS
  • 1991 Nissan Skyline R32 GTS-4
  • 1991 Nissan Skyline R32 GTS-T
  • 1992 Nissan Skyline R32 GTS
  • 1992 Nissan Skyline R32 GTS-4
  • 1992 Nissan Skyline R32 GTS-T
  • 1993 Nissan Skyline R32 GTS
  • 1993 Nissan Skyline R32 GTS-4
  • 1993 Nissan Skyline R32 GTS-T
  • 1993 Nissan Skyline R33 GTS
  • 1993 Nissan Skyline R33 GTS-T
  • 1994 Nissan Skyline R33 GTS
  • 1994 Nissan Skyline R33 GTS-T
  • 1995 Nissan Skyline R33 GTS
  • 1995 Nissan Skyline R33 GTS-T
  • 1996 Nissan Skyline R33 GTS
  • 1996 Nissan Skyline R33 GTS-T
  • 1997 Nissan Skyline R33 GTS
  • 1997 Nissan Skyline R33 GTS-T
  • 1998 Nissan Skyline R33 GTS
  • 1998 Nissan Skyline R33 GTS-T
  • 1998 Nissan Skyline R34 GT
  • 1998 Nissan Skyline R34 GT-T
  • 1999 Nissan Skyline R34 GT
  • 1999 Nissan Skyline R34 GT-T
  • 2000 Nissan Skyline R34 GT
  • 2000 Nissan Skyline R34 GT-T
  • 2001 Nissan Skyline R34 GT
  • 2001 Nissan Skyline R34 GT-T
  • 2002 Nissan Skyline R34 GT
  • 2002 Nissan Skyline R34 GT-T

 

  • We offer Local Delivery and Pickup
  • Secure payments
  • In stock, ready to ship
  • Inventory on the way
Tax included. Shipping calculated at checkout.

It is for good reason that virtually every top professional engine builder relies on ARP Pro Series head studs for their all-out competition powerplants. Simply stated, there’s not a better stud setup on the market today.

For openers, ARP uses a premium grade 8740 alloy that is rated far superior to “aircraft” quality. Each stud is placed vertically in special racks and precisely heat-treated to 200,000 psi. This procedure ensures complete heat penetration and the results are far superior to those lesser quality studs from other manufacturers who just dump pieces in a basket and hope for the best.

Following heat-treat, each stud is centerless ground to make it as close to perfectly concentric as possible. This procedure involves about ten very slight cuts and results in an exceptionally straight part. It’s important to note that lesser quality studs are not even centerless ground – the material is thread rolled in bar stock form (mostly before heat-treat, when the material is easier to machine). Because ARP studs are manufactured to such exacting tolerances, you will note that gaskets and cylinder heads literally glide into position and are perfectly aligned – something that won’t happen with inferior quality head studs.

ARP studs are thread rolled after heat-treat, which gives them about 1000% (that’s ten times) better fatigue strength than those studs that are threaded prior to heat-treat (a very common industry practice). It costs a lot more to do it this way, because it’s tough on tooling, but the results are well worth the extra effort.

You will also note that ARP offers specially undercut studs for several engines. This procedure (done only to the shorter studs) more equalizes the “stretch” of both studs, which makes for a more consistent clamping force – and one that compensates for head gasket compression when the cylinder heads are installed. This helps prevent blown head gaskets, and assures optimum engine sealing!

Premium quality heat-treated 8740 chrome moly steel head stud kits are available for most every domestic and import applications.

You won’t find a better quality stud on the market from any other source. Look for ARP stamped on each stud as your assurance of quality.

Clearly, ARP Head Stud/Bolt Kits are the best on the market today, and the favorite of leading professional engine builders in all forms of racing.

 

Vehicle Fitment:

  • Nissan Skyline R32 GTS, GTS-T (RB20DE/RB20DET)
  • Nissan Skyline R33 GTS, GTS-T (RB25DE/RB25DET)
  • Nissan Skyline R34 GT, GT-T (RB25DE/RB25DET)
Specifications
Socket Size(s) 1/2 12pt, 3/16 Allen
Vehicle Fitment is provided as a guide only to narrow down results. Please check listing for any additional information (measurements, specifications, additional notes) which may affect compatibility or ask for assistance.
  • 1989 Nissan Skyline R32 GTS
  • 1989 Nissan Skyline R32 GTS-4
  • 1989 Nissan Skyline R32 GTS-T
  • 1990 Nissan Skyline R32 GTS
  • 1990 Nissan Skyline R32 GTS-4
  • 1990 Nissan Skyline R32 GTS-T
  • 1991 Nissan Skyline R32 GTS
  • 1991 Nissan Skyline R32 GTS-4
  • 1991 Nissan Skyline R32 GTS-T
  • 1992 Nissan Skyline R32 GTS
  • 1992 Nissan Skyline R32 GTS-4
  • 1992 Nissan Skyline R32 GTS-T
  • 1993 Nissan Skyline R32 GTS
  • 1993 Nissan Skyline R32 GTS-4
  • 1993 Nissan Skyline R32 GTS-T
  • 1993 Nissan Skyline R33 GTS
  • 1993 Nissan Skyline R33 GTS-T
  • 1994 Nissan Skyline R33 GTS
  • 1994 Nissan Skyline R33 GTS-T
  • 1995 Nissan Skyline R33 GTS
  • 1995 Nissan Skyline R33 GTS-T
  • 1996 Nissan Skyline R33 GTS
  • 1996 Nissan Skyline R33 GTS-T
  • 1997 Nissan Skyline R33 GTS
  • 1997 Nissan Skyline R33 GTS-T
  • 1998 Nissan Skyline R33 GTS
  • 1998 Nissan Skyline R33 GTS-T
  • 1998 Nissan Skyline R34 GT
  • 1998 Nissan Skyline R34 GT-T
  • 1999 Nissan Skyline R34 GT
  • 1999 Nissan Skyline R34 GT-T
  • 2000 Nissan Skyline R34 GT
  • 2000 Nissan Skyline R34 GT-T
  • 2001 Nissan Skyline R34 GT
  • 2001 Nissan Skyline R34 GT-T
  • 2002 Nissan Skyline R34 GT
  • 2002 Nissan Skyline R34 GT-T

 

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Sold Out
Kelford Performance Camshafts - Toyota Yaris GR XPA16R - Sydney Performance Parts & Tyres - Prestons Sydney Australia
Kelford Performance Camshafts - Toyota Yaris GR XPA16R
Kelford Cams
$1,425.00
Sold Out
Kelford Performance Camshafts - Toyota Supra JZA80 (2JZ Non-VVTi) - Sydney Performance Parts & Tyres - Prestons Sydney Australia
Kelford Performance Camshafts - Toyota Supra JZA80 (2JZ Non-VVTi)
Kelford Cams
$1,150.00
Sold Out
Kelford Beehive Valve Springs & Retainers Kit - Toyota Yaris GR XPA16R - Sydney Performance Parts & Tyres - Prestons Sydney Australia
Kelford Beehive Valve Springs & Retainers Kit - Toyota Yaris GR XPA16R
Kelford Cams
$703.34
Sold Out
ARP Head Stud Kit - Nissan Skyline R32/R33/R34 (RB20/RB25) - Sydney Performance Parts & Tyres - Prestons Sydney Australia
ARP Head Stud Kit - Nissan Skyline R32/R33/R34 (RB20/RB25)
ARP
$319.95
Sold Out
ARP Ring Gear Bolt Kit - VW 02M - Sydney Performance Parts & Tyres - Prestons Sydney Australia
ARP Ring Gear Bolt Kit - VW 02M
ARP
$369.95
Recently viewed