Invidia Front Pipe Catless - Subaru BRZ & Toyota 86 12-21, 22+ (6MT)

Invidia SKU: HS12SSTFPP
Invidia Front Pipe Catless - Subaru BRZ & Toyota 86 12-21, 22+ (6MT) - Sydney Performance Parts & Tyres - Prestons Sydney Australia

Invidia Front Pipe Catless - Subaru BRZ & Toyota 86 12-21, 22+ (6MT)

Invidia SKU: HS12SSTFPP
سعر عادي $449.00
/

Note: Suits manual transmission only.

 

INVIDIA FRONT PIPE

The factory exhaust will always have restrictions and these restrictions are normally highest near where the catalytic converter is found. Invidia Exhausts use a larger pipe diameter and smooth bends which allows exhaust gases to pass with fewer restrictions and turbulence. A High-Flow catalytic converter is then utilised to still control emissions for street driving legalities but with minimal impact to exhaust flow. In some cases Invidia will also offer catless versions for off-road use where every ounce of performance is required. 

Because of these reasons, Invidia front pipes and cat pipes make for the most popular exhaust upgrade that adds a substantial bump in both horsepower and torque.

To withstand the high temperatures laser cut cast steel flanges are used to ensure long lasting leak free reliability. This is a 100% bolt on installation for right-hand drive vehicles with no modifications or changes required.  Factory O2 sensor locations are also retained where required to ensure compatibility with factory systems.

 

INVIDIA PERFORMANCE

Far more engineering goes in to the design of an exhaust system than many realise. From a performance perspective, there is a fine balance between exhaust back pressure and exhaust gas velocity. Too large a diameter pipe, and low down power and torque is sacrificed (particularly on naturally aspirated cars), too small a diameter or added restrictions and bottle necks in the system, and the engine is unable to push gasses out of the combustion chamber efficiently, reducing power and torque. There are many other technical aspects such as "scavenging effect" which are beyond the scope of this document, but the point is, it's not as simple as just strap on a drain pipe and gains for days. A "quality" exhaust system maximizes performance gains by design.

Invidia High Performance employ a team of engineers and conduct thorough research and development for every single exhaust component they manufacture, ensuring performance to match the customer's needs in every instance, including the use of the highest quality High Flow Catalytic Converters where applicable.

 

INVIDIA SOUND

What an exhaust sounds like is typically the number one factor when choosing a system. The acoustics of an exhaust system are hugely complex. Many people believe that all an exhaust does is muffle the natural tone of the engine, but in the vast majority of cases this is far from the truth, in fact companies like Ferrari, Lamborghini, Pagani, Porsche and alike all spend massive amounts of time and money "fine tuning" their exhaust systems to sound exactly how they want them to. Put a straight pipe on just about any hypercar and that distinctive engine note is lost.

Tuning the sound of an exhaust system adds an additional layer of complexity to the performance aspect of the design process. The goal is to design a system that sounds great, without adversely affecting performance. Invidia spend countless hours on research and development, including listening to customer feedback in order to fine tune their systems to suit the target market for each model from the quieter Q300 to the Race orientated G5 Titan, so you can be assured your car sounds its absolute best, without sacrificing performance.

 

INVIDIA CONSTRUCTION

The final piece of the puzzle is perhaps the most important of all. you don't have to be an expert to realise that all the research and development in the world means nothing if the final product is built with sub-standard materials, using sub-standard manufacturing techniques. From the very beginning, Invidia employ state of the art manufacturing techniques to ensure form, fit and finish are all on point.

 First, a 3D scan is take of the underside of the car to ensure fitment is 100% correct.  Next, grade 304 Stainless Steel  (with the exception of their titanium systems of course) is selected for all piping, mufflers and flanges. This particular grade is chosen for its strength, durability (ability to withstand the elements),  and its ability to be formed and welded with relative consistency and ease. Cast flanges are then used which ensures 100% correct fitment every time, no leaks or additional stress points, and long lasting strength.    , an

Finally, robotic welding machines are used to ensure every single weld is uniform and precise, not only adding a huge amount of strength, but also removing manufacturing variances which are unavoidable when doing a task by hand. This means every system that rolls off the production line is just about as identical as possible. All built to the same incredible high standard. Did we mention it also looks absolutely awesome?  

  

   INVIDIA LIFETIME WARRANTY

Buy with confidence! Invidia Exhausts Australia's LIFETIME WARRANTY applies to this product. Invidia Exhausts Australia warrants all of its products with a limited lifetime warranty policy. Lifetime Warranty covers:

  • Structural welds
  • Mufflers and internals
  • Cracks
  • Manufacture defects

Lifetime Warranty does not cover:

  • Catalytic Convertors (2 Years warranty)
  • Logo or Invidia Badge falling off
  • Scrapes or scrubbing
  • Crashes/Vehicle Accidents

Terms and conditions apply.

 

Vehicle Fitment:

  • 2012-2021 Subaru BRZ (Manual Only)
  • 2022+ Subaru BRZ (Manual Only)
  • 2012-2021 Toyota 86 (Manual Only)
  • 2022+ Toyota 86 (Manual Only)
  • Piping Diameter: 60mm
  • Piping Thickness: 1.5mm
  • Piping Material: 304 Stainless Steel
  • Flange Material: Cast 304 Stainless Steel
  • Catted: No
  • Catalytic Converter Spec: N/A
  • Included Hardware:
    • Cat-Back Gasket
    • Cat-Back Nuts/Bolts
Vehicle Fitment is provided as a guide only to narrow down results. Please check listing for any additional information (measurements, specifications, additional notes) which may affect compatibility or ask for assistance.
  • 2012 Subaru BRZ ZC6
  • 2012 Toyota 86 ZN6
  • 2013 Subaru BRZ ZC6
  • 2013 Toyota 86 ZN6
  • 2014 Subaru BRZ ZC6
  • 2014 Toyota 86 ZN6
  • 2015 Subaru BRZ ZC6
  • 2015 Toyota 86 ZN6
  • 2016 Subaru BRZ ZC6
  • 2016 Toyota 86 ZN6
  • 2017 Subaru BRZ ZC6
  • 2017 Toyota 86 ZN6
  • 2018 Subaru BRZ ZC6
  • 2018 Toyota 86 ZN6
  • 2019 Subaru BRZ ZC6
  • 2019 Toyota 86 ZN6
  • 2020 Subaru BRZ ZC6
  • 2020 Toyota 86 ZN6
  • 2021 Subaru BRZ ZC6
  • 2021 Toyota 86 ZN6
  • 2022 Subaru BRZ ZD8
  • 2022 Toyota 86 GR ZN8

 

  • We offer Local Delivery and Pickup
  • مدفوعات آمنة
  • الأسهم منخفضة -1 العنصر المتبقي
  • Inventory on the way
شامل الضريبة. شحن محسوبة عند الخروج.

Note: Suits manual transmission only.

 

INVIDIA FRONT PIPE

The factory exhaust will always have restrictions and these restrictions are normally highest near where the catalytic converter is found. Invidia Exhausts use a larger pipe diameter and smooth bends which allows exhaust gases to pass with fewer restrictions and turbulence. A High-Flow catalytic converter is then utilised to still control emissions for street driving legalities but with minimal impact to exhaust flow. In some cases Invidia will also offer catless versions for off-road use where every ounce of performance is required. 

Because of these reasons, Invidia front pipes and cat pipes make for the most popular exhaust upgrade that adds a substantial bump in both horsepower and torque.

To withstand the high temperatures laser cut cast steel flanges are used to ensure long lasting leak free reliability. This is a 100% bolt on installation for right-hand drive vehicles with no modifications or changes required.  Factory O2 sensor locations are also retained where required to ensure compatibility with factory systems.

 

INVIDIA PERFORMANCE

Far more engineering goes in to the design of an exhaust system than many realise. From a performance perspective, there is a fine balance between exhaust back pressure and exhaust gas velocity. Too large a diameter pipe, and low down power and torque is sacrificed (particularly on naturally aspirated cars), too small a diameter or added restrictions and bottle necks in the system, and the engine is unable to push gasses out of the combustion chamber efficiently, reducing power and torque. There are many other technical aspects such as "scavenging effect" which are beyond the scope of this document, but the point is, it's not as simple as just strap on a drain pipe and gains for days. A "quality" exhaust system maximizes performance gains by design.

Invidia High Performance employ a team of engineers and conduct thorough research and development for every single exhaust component they manufacture, ensuring performance to match the customer's needs in every instance, including the use of the highest quality High Flow Catalytic Converters where applicable.

 

INVIDIA SOUND

What an exhaust sounds like is typically the number one factor when choosing a system. The acoustics of an exhaust system are hugely complex. Many people believe that all an exhaust does is muffle the natural tone of the engine, but in the vast majority of cases this is far from the truth, in fact companies like Ferrari, Lamborghini, Pagani, Porsche and alike all spend massive amounts of time and money "fine tuning" their exhaust systems to sound exactly how they want them to. Put a straight pipe on just about any hypercar and that distinctive engine note is lost.

Tuning the sound of an exhaust system adds an additional layer of complexity to the performance aspect of the design process. The goal is to design a system that sounds great, without adversely affecting performance. Invidia spend countless hours on research and development, including listening to customer feedback in order to fine tune their systems to suit the target market for each model from the quieter Q300 to the Race orientated G5 Titan, so you can be assured your car sounds its absolute best, without sacrificing performance.

 

INVIDIA CONSTRUCTION

The final piece of the puzzle is perhaps the most important of all. you don't have to be an expert to realise that all the research and development in the world means nothing if the final product is built with sub-standard materials, using sub-standard manufacturing techniques. From the very beginning, Invidia employ state of the art manufacturing techniques to ensure form, fit and finish are all on point.

 First, a 3D scan is take of the underside of the car to ensure fitment is 100% correct.  Next, grade 304 Stainless Steel  (with the exception of their titanium systems of course) is selected for all piping, mufflers and flanges. This particular grade is chosen for its strength, durability (ability to withstand the elements),  and its ability to be formed and welded with relative consistency and ease. Cast flanges are then used which ensures 100% correct fitment every time, no leaks or additional stress points, and long lasting strength.    , an

Finally, robotic welding machines are used to ensure every single weld is uniform and precise, not only adding a huge amount of strength, but also removing manufacturing variances which are unavoidable when doing a task by hand. This means every system that rolls off the production line is just about as identical as possible. All built to the same incredible high standard. Did we mention it also looks absolutely awesome?  

  

   INVIDIA LIFETIME WARRANTY

Buy with confidence! Invidia Exhausts Australia's LIFETIME WARRANTY applies to this product. Invidia Exhausts Australia warrants all of its products with a limited lifetime warranty policy. Lifetime Warranty covers:

  • Structural welds
  • Mufflers and internals
  • Cracks
  • Manufacture defects

Lifetime Warranty does not cover:

  • Catalytic Convertors (2 Years warranty)
  • Logo or Invidia Badge falling off
  • Scrapes or scrubbing
  • Crashes/Vehicle Accidents

Terms and conditions apply.

 

Vehicle Fitment:

  • 2012-2021 Subaru BRZ (Manual Only)
  • 2022+ Subaru BRZ (Manual Only)
  • 2012-2021 Toyota 86 (Manual Only)
  • 2022+ Toyota 86 (Manual Only)
  • Piping Diameter: 60mm
  • Piping Thickness: 1.5mm
  • Piping Material: 304 Stainless Steel
  • Flange Material: Cast 304 Stainless Steel
  • Catted: No
  • Catalytic Converter Spec: N/A
  • Included Hardware:
    • Cat-Back Gasket
    • Cat-Back Nuts/Bolts
Vehicle Fitment is provided as a guide only to narrow down results. Please check listing for any additional information (measurements, specifications, additional notes) which may affect compatibility or ask for assistance.
  • 2012 Subaru BRZ ZC6
  • 2012 Toyota 86 ZN6
  • 2013 Subaru BRZ ZC6
  • 2013 Toyota 86 ZN6
  • 2014 Subaru BRZ ZC6
  • 2014 Toyota 86 ZN6
  • 2015 Subaru BRZ ZC6
  • 2015 Toyota 86 ZN6
  • 2016 Subaru BRZ ZC6
  • 2016 Toyota 86 ZN6
  • 2017 Subaru BRZ ZC6
  • 2017 Toyota 86 ZN6
  • 2018 Subaru BRZ ZC6
  • 2018 Toyota 86 ZN6
  • 2019 Subaru BRZ ZC6
  • 2019 Toyota 86 ZN6
  • 2020 Subaru BRZ ZC6
  • 2020 Toyota 86 ZN6
  • 2021 Subaru BRZ ZC6
  • 2021 Toyota 86 ZN6
  • 2022 Subaru BRZ ZD8
  • 2022 Toyota 86 GR ZN8

 

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

اكثر منToyota
تخفيض السعر
GFB G-Force 3 Electronic Boost Controller - Sydney Performance Parts & Tyres - Prestons Sydney Australia
GFB G-Force 3 Electronic Boost Controller
Go Fast Bits
Sale price $368.10 سعر عادي $409.00 يحفظ$40.90
تخفيض السعر
GFB Boost Pressure Gauge - Sydney Performance Parts & Tyres - Prestons Sydney Australia
GFB Boost Pressure Gauge
Go Fast Bits
Sale price $82.80 سعر عادي $92.00 يحفظ$9.20
Sold Out
Invidia N1/N2 Gasket/Hardware Kit - Subaru BRZ & Toyota 86 12-21, 22+ - Sydney Performance Parts & Tyres - Prestons Sydney Australia
Invidia N1/N2 Gasket/Hardware Kit - Subaru BRZ & Toyota 86 12-21, 22+
Invidia
$69.00
Sold Out
Koyorad R Series Aluminium Racing Radiator - Toyota Supra MA80
Koyo
$649.95
Sold Out
Koyorad Aluminium Racing Radiator - Toyota Corolla AE86 84-87
Koyo
$624.95
شوهدت مؤخرا