ARP Head Stud Kit - Honda S2000 AP1 (F20)

ARP SKU: 208-4702
ARP Head Stud Kit - Honda S2000 AP1 (F20) - Sydney Performance Parts & Tyres - Prestons Sydney Australia

ARP Head Stud Kit - Honda S2000 AP1 (F20)

ARP SKU: 208-4702
سعر عادي $290.00
/

It is for good reason that virtually every top professional engine builder relies on ARP Pro Series head studs for their all-out competition powerplants. Simply stated, there’s not a better stud setup on the market today.

For openers, ARP uses a premium grade 8740 alloy that is rated far superior to “aircraft” quality. Each stud is placed vertically in special racks and precisely heat-treated to 200,000 psi. This procedure ensures complete heat penetration and the results are far superior to those lesser quality studs from other manufacturers who just dump pieces in a basket and hope for the best.

Following heat-treat, each stud is centerless ground to make it as close to perfectly concentric as possible. This procedure involves about ten very slight cuts and results in an exceptionally straight part. It’s important to note that lesser quality studs are not even centerless ground – the material is thread rolled in bar stock form (mostly before heat-treat, when the material is easier to machine). Because ARP studs are manufactured to such exacting tolerances, you will note that gaskets and cylinder heads literally glide into position and are perfectly aligned – something that won’t happen with inferior quality head studs.

ARP studs are thread rolled after heat-treat, which gives them about 1000% (that’s ten times) better fatigue strength than those studs that are threaded prior to heat-treat (a very common industry practice). It costs a lot more to do it this way, because it’s tough on tooling, but the results are well worth the extra effort.

You will also note that ARP offers specially undercut studs for several engines. This procedure (done only to the shorter studs) more equalizes the “stretch” of both studs, which makes for a more consistent clamping force – and one that compensates for head gasket compression when the cylinder heads are installed. This helps prevent blown head gaskets, and assures optimum engine sealing!

Premium quality heat-treated 8740 chrome moly steel head stud kits are available for most every domestic and import applications.

You won’t find a better quality stud on the market from any other source. Look for ARP stamped on each stud as your assurance of quality.

Clearly, ARP Head Stud/Bolt Kits are the best on the market today, and the favorite of leading professional engine builders in all forms of racing.

Vehicle Fitment is provided as a guide only to narrow down results. Please check listing for any additional information (measurements, specifications, additional notes) which may affect compatibility or ask for assistance.
  • 1999 Honda S2000 AP1
  • 2000 Honda S2000 AP1
  • 2001 Honda S2000 AP1
  • 2002 Honda S2000 AP1
  • 2003 Honda S2000 AP1

 

  • We offer Local Delivery and Pickup
  • مدفوعات آمنة
  • في اسهم وأمبير. على استعداد للسفينة
  • Inventory on the way
شامل الضريبة. شحن محسوبة عند الخروج.

It is for good reason that virtually every top professional engine builder relies on ARP Pro Series head studs for their all-out competition powerplants. Simply stated, there’s not a better stud setup on the market today.

For openers, ARP uses a premium grade 8740 alloy that is rated far superior to “aircraft” quality. Each stud is placed vertically in special racks and precisely heat-treated to 200,000 psi. This procedure ensures complete heat penetration and the results are far superior to those lesser quality studs from other manufacturers who just dump pieces in a basket and hope for the best.

Following heat-treat, each stud is centerless ground to make it as close to perfectly concentric as possible. This procedure involves about ten very slight cuts and results in an exceptionally straight part. It’s important to note that lesser quality studs are not even centerless ground – the material is thread rolled in bar stock form (mostly before heat-treat, when the material is easier to machine). Because ARP studs are manufactured to such exacting tolerances, you will note that gaskets and cylinder heads literally glide into position and are perfectly aligned – something that won’t happen with inferior quality head studs.

ARP studs are thread rolled after heat-treat, which gives them about 1000% (that’s ten times) better fatigue strength than those studs that are threaded prior to heat-treat (a very common industry practice). It costs a lot more to do it this way, because it’s tough on tooling, but the results are well worth the extra effort.

You will also note that ARP offers specially undercut studs for several engines. This procedure (done only to the shorter studs) more equalizes the “stretch” of both studs, which makes for a more consistent clamping force – and one that compensates for head gasket compression when the cylinder heads are installed. This helps prevent blown head gaskets, and assures optimum engine sealing!

Premium quality heat-treated 8740 chrome moly steel head stud kits are available for most every domestic and import applications.

You won’t find a better quality stud on the market from any other source. Look for ARP stamped on each stud as your assurance of quality.

Clearly, ARP Head Stud/Bolt Kits are the best on the market today, and the favorite of leading professional engine builders in all forms of racing.

Vehicle Fitment is provided as a guide only to narrow down results. Please check listing for any additional information (measurements, specifications, additional notes) which may affect compatibility or ask for assistance.
  • 1999 Honda S2000 AP1
  • 2000 Honda S2000 AP1
  • 2001 Honda S2000 AP1
  • 2002 Honda S2000 AP1
  • 2003 Honda S2000 AP1

 

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Sold Out
ARP Head Stud Kit - Nissan Skyline R32/R33/R34 (RB20/RB25) - Sydney Performance Parts & Tyres - Prestons Sydney Australia
ARP Head Stud Kit - Nissan Skyline R32/R33/R34 (RB20/RB25)
ARP
$319.95
Sold Out
Subaru Genuine Flywheel Bolt SINGLE - Subaru WRX, STI 94-00/Forester SF/Liberty RS - Sydney Performance Parts & Tyres - Prestons Sydney Australia
Subaru Genuine Flywheel Bolt SINGLE - Subaru WRX, STI 94-00/Forester SF/Liberty RS
Subaru
$4.95
Sold Out
Subaru Genuine Flywheel Bolt SINGLE - Subaru WRX 01-14/STI 01-21/FXT/LGT (EJ20/EJ25) - Sydney Performance Parts & Tyres - Prestons Sydney Australia
Subaru Genuine Flywheel Bolt SINGLE - Subaru WRX 01-14/STI 01-21/FXT/LGT (EJ20/EJ25)
Subaru
$7.50
Sold Out
Subaru Genuine Crankshaft Wood Ruf Key - Subaru WRX 99-14/STI 99-21/FXT/LGT (EJ20/EJ25) - Sydney Performance Parts & Tyres - Prestons Sydney Australia
Subaru Genuine Crankshaft Wood Ruf Key - Subaru WRX 99-14/STI 99-21/FXT/LGT (EJ20/EJ25)
Subaru
$5.65
Sold Out
Subaru Genuine Crankshaft Pulley Bolt - Subaru WRX 99-14/STI 99-21/FXT/LGT (EJ20/EJ25) - Sydney Performance Parts & Tyres - Prestons Sydney Australia
Subaru Genuine Crankshaft Pulley Bolt - Subaru WRX 99-14/STI 99-21/FXT/LGT (EJ20/EJ25)
Subaru
$24.50
Sold Out
Subaru Genuine Block Dowel Pin 14.7x18 SINGLE - Subaru WRX 99-14/STI 99-21/FXT/LGT (EJ20/EJ25) - Sydney Performance Parts & Tyres - Prestons Sydney Australia
Subaru Genuine Block Dowel Pin 14.7x18 SINGLE - Subaru WRX 99-14/STI 99-21/FXT/LGT (EJ20/EJ25)
Subaru
$6.50
شوهدت مؤخرا