Invidia Down Pipe/Front Pipe w/High Flow Cat - Mitsubishi Evo X CZ4A

Invidia SKU: HS09MEXDPC
Invidia Down Pipe/Front Pipe w/High Flow Cat - Mitsubishi Evo X CZ4A - Sydney Performance Parts & Tyres - Prestons Sydney Australia
Invidia Down Pipe/Front Pipe w/High Flow Cat - Mitsubishi Evo X CZ4A - Sydney Performance Parts & Tyres - Prestons Sydney Australia
Invidia Down Pipe/Front Pipe w/High Flow Cat - Mitsubishi Evo X CZ4A - Sydney Performance Parts & Tyres - Prestons Sydney Australia

Invidia Down Pipe/Front Pipe w/High Flow Cat - Mitsubishi Evo X CZ4A

Invidia SKU: HS09MEXDPC
سعر عادي $1,099.00
/

INVIDIA FRONT PIPE

The factory exhaust will always have restrictions and these restrictions are normally highest near where the catalytic converter is found. Invidia Exhausts use a larger pipe diameter and smooth bends which allows exhaust gases to pass with fewer restrictions and turbulence. A High-Flow catalytic converter is then utilised to still control emissions for street driving legalities but with minimal impact to exhaust flow. In some cases Invidia will also offer catless versions for off-road use where every ounce of performance is required. 

Because of these reasons, Invidia front pipes and cat pipes make for the most popular exhaust upgrade that adds a substantial bump in both horsepower and torque.

To withstand the high temperatures laser cut cast steel flanges are used to ensure long lasting leak free reliability. This is a 100% bolt on installation for right-hand drive vehicles with no modifications or changes required.  Factory O2 sensor locations are also retained where required to ensure compatibility with factory systems.

 

INVIDIA PERFORMANCE

Far more engineering goes in to the design of an exhaust system than many realise. From a performance perspective, there is a fine balance between exhaust back pressure and exhaust gas velocity. Too large a diameter pipe, and low down power and torque is sacrificed (particularly on naturally aspirated cars), too small a diameter or added restrictions and bottle necks in the system, and the engine is unable to push gasses out of the combustion chamber efficiently, reducing power and torque. There are many other technical aspects such as "scavenging effect" which are beyond the scope of this document, but the point is, it's not as simple as just strap on a drain pipe and gains for days. A "quality" exhaust system maximizes performance gains by design.

Invidia High Performance employ a team of engineers and conduct thorough research and development for every single exhaust component they manufacture, ensuring performance to match the customer's needs in every instance, including the use of the highest quality High Flow Catalytic Converters where applicable.

 

INVIDIA SOUND

What an exhaust sounds like is typically the number one factor when choosing a system. The acoustics of an exhaust system are hugely complex. Many people believe that all an exhaust does is muffle the natural tone of the engine, but in the vast majority of cases this is far from the truth, in fact companies like Ferrari, Lamborghini, Pagani, Porsche and alike all spend massive amounts of time and money "fine tuning" their exhaust systems to sound exactly how they want them to. Put a straight pipe on just about any hypercar and that distinctive engine note is lost.

Tuning the sound of an exhaust system adds an additional layer of complexity to the performance aspect of the design process. The goal is to design a system that sounds great, without adversely affecting performance. Invidia spend countless hours on research and development, including listening to customer feedback in order to fine tune their systems to suit the target market for each model from the quieter Q300 to the Race orientated G5 Titan, so you can be assured your car sounds its absolute best, without sacrificing performance.

 

INVIDIA CONSTRUCTION

The final piece of the puzzle is perhaps the most important of all. you don't have to be an expert to realise that all the research and development in the world means nothing if the final product is built with sub-standard materials, using sub-standard manufacturing techniques. From the very beginning, Invidia employ state of the art manufacturing techniques to ensure form, fit and finish are all on point.

 First, a 3D scan is take of the underside of the car to ensure fitment is 100% correct.  Next, grade 304 Stainless Steel  (with the exception of their titanium systems of course) is selected for all piping, mufflers and flanges. This particular grade is chosen for its strength, durability (ability to withstand the elements),  and its ability to be formed and welded with relative consistency and ease. Cast flanges are then used which ensures 100% correct fitment every time, no leaks or additional stress points, and long lasting strength.    , an

Finally, robotic welding machines are used to ensure every single weld is uniform and precise, not only adding a huge amount of strength, but also removing manufacturing variances which are unavoidable when doing a task by hand. This means every system that rolls off the production line is just about as identical as possible. All built to the same incredible high standard. Did we mention it also looks absolutely awesome?  

  

   INVIDIA LIFETIME WARRANTY

Buy with confidence! Invidia Exhausts Australia's LIFETIME WARRANTY applies to this product. Invidia Exhausts Australia warrants all of its products with a limited lifetime warranty policy. Lifetime Warranty covers:

  • Structural welds
  • Mufflers and internals
  • Cracks
  • Manufacture defects

Lifetime Warranty does not cover:

  • Catalytic Convertors (2 Years warranty)
  • Logo or Invidia Badge falling off
  • Scrapes or scrubbing
  • Crashes/Vehicle Accidents

Terms and conditions apply.

  • Piping Diameter: 76mm
  • Piping Thickness: 1.5mm
  • Piping Material: 304 Stainless Steel
  • Flange Material: Cast 304 Stainless Steel
  • Catted: Yes
  • Catalytic Converter Spec: 200 Cel
  • Included Hardware:
    • Cat-Back Gasket (turbo to down-pipe gasket NOT included)
    • Cat-Back Nuts/Bolts
Vehicle Fitment is provided as a guide only to narrow down results. Please check listing for any additional information (measurements, specifications, additional notes) which may affect compatibility or ask for assistance.
  • 2008 Mitsubishi Evo X CZ4A
  • 2008 Mitsubishi Lancer Ralliart CY4A
  • 2009 Mitsubishi Evo X CZ4A
  • 2009 Mitsubishi Lancer Ralliart CY4A
  • 2010 Mitsubishi Evo X CZ4A
  • 2010 Mitsubishi Lancer Ralliart CY4A
  • 2011 Mitsubishi Evo X CZ4A
  • 2011 Mitsubishi Lancer Ralliart CY4A
  • 2012 Mitsubishi Evo X CZ4A
  • 2012 Mitsubishi Lancer Ralliart CY4A
  • 2013 Mitsubishi Evo X CZ4A
  • 2013 Mitsubishi Lancer Ralliart CY4A
  • 2014 Mitsubishi Evo X CZ4A
  • 2014 Mitsubishi Lancer Ralliart CY4A
  • 2015 Mitsubishi Evo X CZ4A
  • 2015 Mitsubishi Lancer Ralliart CY4A
  • 2016 Mitsubishi Evo X CZ4A
  • 2016 Mitsubishi Lancer Ralliart CY4A
  • 2017 Mitsubishi Lancer Ralliart CY4A

 

  • We offer Local Delivery and Pickup
  • مدفوعات آمنة
  • الأسهم منخفضة -1 العنصر المتبقي
  • Inventory on the way
شامل الضريبة. شحن محسوبة عند الخروج.

INVIDIA FRONT PIPE

The factory exhaust will always have restrictions and these restrictions are normally highest near where the catalytic converter is found. Invidia Exhausts use a larger pipe diameter and smooth bends which allows exhaust gases to pass with fewer restrictions and turbulence. A High-Flow catalytic converter is then utilised to still control emissions for street driving legalities but with minimal impact to exhaust flow. In some cases Invidia will also offer catless versions for off-road use where every ounce of performance is required. 

Because of these reasons, Invidia front pipes and cat pipes make for the most popular exhaust upgrade that adds a substantial bump in both horsepower and torque.

To withstand the high temperatures laser cut cast steel flanges are used to ensure long lasting leak free reliability. This is a 100% bolt on installation for right-hand drive vehicles with no modifications or changes required.  Factory O2 sensor locations are also retained where required to ensure compatibility with factory systems.

 

INVIDIA PERFORMANCE

Far more engineering goes in to the design of an exhaust system than many realise. From a performance perspective, there is a fine balance between exhaust back pressure and exhaust gas velocity. Too large a diameter pipe, and low down power and torque is sacrificed (particularly on naturally aspirated cars), too small a diameter or added restrictions and bottle necks in the system, and the engine is unable to push gasses out of the combustion chamber efficiently, reducing power and torque. There are many other technical aspects such as "scavenging effect" which are beyond the scope of this document, but the point is, it's not as simple as just strap on a drain pipe and gains for days. A "quality" exhaust system maximizes performance gains by design.

Invidia High Performance employ a team of engineers and conduct thorough research and development for every single exhaust component they manufacture, ensuring performance to match the customer's needs in every instance, including the use of the highest quality High Flow Catalytic Converters where applicable.

 

INVIDIA SOUND

What an exhaust sounds like is typically the number one factor when choosing a system. The acoustics of an exhaust system are hugely complex. Many people believe that all an exhaust does is muffle the natural tone of the engine, but in the vast majority of cases this is far from the truth, in fact companies like Ferrari, Lamborghini, Pagani, Porsche and alike all spend massive amounts of time and money "fine tuning" their exhaust systems to sound exactly how they want them to. Put a straight pipe on just about any hypercar and that distinctive engine note is lost.

Tuning the sound of an exhaust system adds an additional layer of complexity to the performance aspect of the design process. The goal is to design a system that sounds great, without adversely affecting performance. Invidia spend countless hours on research and development, including listening to customer feedback in order to fine tune their systems to suit the target market for each model from the quieter Q300 to the Race orientated G5 Titan, so you can be assured your car sounds its absolute best, without sacrificing performance.

 

INVIDIA CONSTRUCTION

The final piece of the puzzle is perhaps the most important of all. you don't have to be an expert to realise that all the research and development in the world means nothing if the final product is built with sub-standard materials, using sub-standard manufacturing techniques. From the very beginning, Invidia employ state of the art manufacturing techniques to ensure form, fit and finish are all on point.

 First, a 3D scan is take of the underside of the car to ensure fitment is 100% correct.  Next, grade 304 Stainless Steel  (with the exception of their titanium systems of course) is selected for all piping, mufflers and flanges. This particular grade is chosen for its strength, durability (ability to withstand the elements),  and its ability to be formed and welded with relative consistency and ease. Cast flanges are then used which ensures 100% correct fitment every time, no leaks or additional stress points, and long lasting strength.    , an

Finally, robotic welding machines are used to ensure every single weld is uniform and precise, not only adding a huge amount of strength, but also removing manufacturing variances which are unavoidable when doing a task by hand. This means every system that rolls off the production line is just about as identical as possible. All built to the same incredible high standard. Did we mention it also looks absolutely awesome?  

  

   INVIDIA LIFETIME WARRANTY

Buy with confidence! Invidia Exhausts Australia's LIFETIME WARRANTY applies to this product. Invidia Exhausts Australia warrants all of its products with a limited lifetime warranty policy. Lifetime Warranty covers:

  • Structural welds
  • Mufflers and internals
  • Cracks
  • Manufacture defects

Lifetime Warranty does not cover:

  • Catalytic Convertors (2 Years warranty)
  • Logo or Invidia Badge falling off
  • Scrapes or scrubbing
  • Crashes/Vehicle Accidents

Terms and conditions apply.

  • Piping Diameter: 76mm
  • Piping Thickness: 1.5mm
  • Piping Material: 304 Stainless Steel
  • Flange Material: Cast 304 Stainless Steel
  • Catted: Yes
  • Catalytic Converter Spec: 200 Cel
  • Included Hardware:
    • Cat-Back Gasket (turbo to down-pipe gasket NOT included)
    • Cat-Back Nuts/Bolts
Vehicle Fitment is provided as a guide only to narrow down results. Please check listing for any additional information (measurements, specifications, additional notes) which may affect compatibility or ask for assistance.
  • 2008 Mitsubishi Evo X CZ4A
  • 2008 Mitsubishi Lancer Ralliart CY4A
  • 2009 Mitsubishi Evo X CZ4A
  • 2009 Mitsubishi Lancer Ralliart CY4A
  • 2010 Mitsubishi Evo X CZ4A
  • 2010 Mitsubishi Lancer Ralliart CY4A
  • 2011 Mitsubishi Evo X CZ4A
  • 2011 Mitsubishi Lancer Ralliart CY4A
  • 2012 Mitsubishi Evo X CZ4A
  • 2012 Mitsubishi Lancer Ralliart CY4A
  • 2013 Mitsubishi Evo X CZ4A
  • 2013 Mitsubishi Lancer Ralliart CY4A
  • 2014 Mitsubishi Evo X CZ4A
  • 2014 Mitsubishi Lancer Ralliart CY4A
  • 2015 Mitsubishi Evo X CZ4A
  • 2015 Mitsubishi Lancer Ralliart CY4A
  • 2016 Mitsubishi Evo X CZ4A
  • 2016 Mitsubishi Lancer Ralliart CY4A
  • 2017 Mitsubishi Lancer Ralliart CY4A

 

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Invidia Catless Down Pipe - Honda Civic Inc RS FC/FK 16-21 (1.5T) - Sydney Performance Parts & Tyres - Prestons Sydney Australia
Invidia Catless Down Pipe - Honda Civic Inc RS FC/FK 16-21 (1.5T) - Sydney Performance Parts & Tyres - Prestons Sydney Australia
Invidia Catless Down Pipe - Honda Civic Inc RS FC/FK 16-21 (1.5T)
Invidia
$499.00
Invidia Down Pipe/J Pipe w/High Flow Cat - Subaru Liberty GT BM/BR 10-12 - Sydney Performance Parts & Tyres - Prestons Sydney Australia
Invidia Down Pipe/J Pipe w/High Flow Cat - Subaru Liberty GT BM/BR 10-12 - Sydney Performance Parts & Tyres - Prestons Sydney Australia
Invidia Down Pipe/J Pipe w/High Flow Cat - Subaru Liberty GT BM/BR 10-12 HS10SL1DPC
Invidia
$1,299.00
STAINLESS STEEL QUICK RELEASE V-BAND KIT
247 Hose & Fittings
من $45.36
Invidia Q300 Cat Back Exhaust w/Ti Rolled Tips - Subaru WRX VB 22+
Invidia
$1,890.00
https://www.sydneyperformance.com.au/products/invidia-r400-cat-back-exhaust-w-round-ti-rolled-tips-vw-golf-gti-mk7 - Sydney Performance Parts & Tyres - Prestons Sydney Australia
https://www.sydneyperformance.com.au/products/invidia-r400-cat-back-exhaust-w-round-ti-rolled-tips-vw-golf-gti-mk7 - Sydney Performance Parts & Tyres - Prestons Sydney Australia
INVIDIA R400 CAT BACK EXHAUST to suit VW Golf Mk7.5 GTI
Invidia
$1,599.00
Invidia N1 Turbo Back Exhaust Resonated w/Catted Down Pipe, Ti Tip - Subaru WRX/STI GD 01-07 - Sydney Performance Parts & Tyres - Prestons Sydney Australia
Invidia N1 Turbo Back Exhaust Resonated w/Catted Down Pipe, Ti Tip - Subaru WRX/STI GD 01-07 - Sydney Performance Parts & Tyres - Prestons Sydney Australia
Invidia N1 Turbo Back Exhaust Resonated w/Catted Down Pipe, Ti Tip - Subaru WRX/STI GD 01-07
Invidia
$1,990.00
شوهدت مؤخرا